Ecosorb™ 505 - Odor treatment for manufacturing, processing, and waste management areas

4.9/5 (477 reviews)

0 đ

Ecosorb™ 505 is a versatile neutralizing agent designed for odor control. It can be diluted or used in its concentrated form, depending on the requirements and equipment in use.

Ecosorb™ 505 - Odor treatment for manufacturing, processing, and waste management areas

Ecosorb™ 505 is used for spraying odor control in high-temperature air, as well as for treating odors in wastewater and sludge. Its action helps to reduce the development of foul odors. Ecosorb™ 505 is a blend of essential oils, food-grade surfactants, and purified water. Ecosorb™ 505 is a product of OMI Industries - USA.

Physical and chemical properties:

  • pH: ~6.0.
  • Specific gravity: ~0.99.
  • Flash point: ~100°C.
  • Color: Milky white.
  • Odor: Pleasant floral scent.
  • Note on pH: Ecosorb™ 505 is produced using purified water, which may contain a small amount of active ions. pH measurements with instruments that detect active ions may indicate a lower value, potentially as low as 4.0.

Applications:

  • Restaurants.
  • Hotels and resorts.
  • Offices.
  • Residential areas.
  • Wastewater treatment plants with high levels of detergents and soaps.

Usage instructions:

Given the product's strong activity, it can be diluted with water at ratios ranging from 1:50 to 1:200, or higher, depending on the application needs. 

The product can also be diluted with less polar solvents such as 2-propanol without any adverse reactions. Diluting the product will create a stable solution, although with reduced viscosity. Whether used in concentrated or diluted form, the product remains effective in addressing odor-causing pollution before it is discharged into natural sources.

Packaging and storage: 

Ecosorb™ 505 is packaged in HDPE plastic drums. It is recommended to store the product in HDPE, polypropylene, or stainless steel containers. The product should be kept sealed; prolonged exposure to air may affect its activity or allow the absorption of airborne dust particles.

Store at temperatures between 2°C and 35°C. The product can be stored under freezing conditions, though this may disrupt its emulsion structure. High temperatures can disperse the emulsion structure, which can be restored through mixing or agitation. Do not incinerate the product.

Cleaning and disposal: 

  • Clean with water or soap. 
  • The product is non-toxic to humans, animals, and the environment, and can be disposed of by pouring it into the drain.
Need to learn more about this product? Contact us for more information.
Online Support
0908 901 955
0909 576 800